KC 23.580, Руководство пользователя

Страница: 4 / 11

The Filter Unit
8
The pump supports four detachable filters made of
AISI 316 stainless steel net. Standard delivery
comes with a coarse filter plate (5000 µm) and 3
nets of 1000, 500 and 300 µm. Assemble the nets
with an empty ring at the bottom (not shown).
9
The pump’s flow goes from the middle of the
cylindrical pump, through the filter unit and the
flow meter then having output at the pumps lower
end.
Insert the filter unit, using the coarse filter on top
and gradually smaller sizes beneath.
In order to cool down the motor, (the upper half),
it is recommended that it is covered by water.
10 Push the filter unit against the stop pins.
11
Insert the locking pin to prevent the filters from
falling out.