KBS RX2000, Инструкция по эксплуатации

Страница: 6 / 45

5
UK
Turn On
1. Ensure the power switch is set to [ O ] and turn on at the socket.
2. Switch on the power switch [ I ]. The current temperature within the appliance is displayed.
Set the Operating Temperature
1. Press the SET button. The display will flash.
2. Press the or buttons to display the
required temperature.
3. Press the SET button to store the temperature.
Manual Defrost
Press and hold the defrost button “ aux ” for 2 seconds
to begin a manual defrost. The defrost light illuminates.
Cleaning, Care & Maintenance
Switch off and disconnect from the power supply before cleaning.
• Clean the interior of the appliance as often as possible.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• Clean the door seal with water only.
• Always wipe dry after cleaning.
• Do not allow water used in cleaning to run through the drain hole into the evaporation pan.
• Take care when cleaning the rear of the appliance. Sharp edges can cut.
• A agent or qualified technician must carry out repairs if required.
Cleaning the Condenser
• Periodically cleaning the condenser can extend the life of the appliance.
•
Recommend that a agent or qualified technician clean the condenser.
Troubleshooting
If your appliance develops a fault, please check the following table before making a call to the
Helpline or your dealer.
Fault Probable Cause Solution
The appliance is not
working The unit is not switched on Check the unit is plugged in correctly and
switched on
Plug and lead are damaged Call agent or qualified Technician
Fuse in the plug has blown Replace the fuse
Power supply Check power supply
Internal wiring fault Call agent or qualified Technician