manualshive.com logo in svg

KBS mini-Compacta, Инструкция по установке и эксплуатации, Страница: 81 / 86

Поделиться
Скачать
KBS mini-Compacta Скачать руководство пользователя страница 81

11 EC Declaration of Conformity

 

Manufacturer:

KSB Aktiengesellschaft

Johann-Klein-Straße 9

67227 Frankenthal (Germany)

 

The manufacturer herewith declares that the product:

 

mini-Compacta

Series code: S-W - S-D or 2013w01 - 2018w52

▪

is in conformity with the provisions of the following Directives as amended from time to time:

– EC Machinery Directive 2006/42/EC
– Construction Products Directive 305/2011/EU
– Electromagnetic Compatibility Directive 2004/108/EC

The manufacturer also declares that

▪

the following harmonised international standards have been applied:

– ISO 12100,
– EN 809/A1,
– EN 60034-1, EN 60034-5/A1,
– EN 60204-1,
– EN 61000-6-2, EN 61000-6-3,
– EN 12050-1

Certified by TÜV Rheinland LGA Products GmbH (0197)

Person authorised to compile the technical file:

 

Armin Reisinger
Technical Project Manager, Product Development, Business Unit Automation and Drives
KSB Aktiengesellschaft
Johann-Klein-Straße 9
67227 Frankenthal (Germany)

The EC Declaration of Conformity was issued in/on:

Frankenthal, 30 April 2014

Joachim Schullerer

Head of Product Development

Automation Products

KSB Aktiengesellschaft

Johann-Klein-Straße 9

67227 Frankenthal (Germany)

 

 

11 EC Declaration of Conformity

 

mini-Compacta

81 of 86

Содержание mini-Compacta























































































Отзывы:

Нет отзывов