V1.00
25845_EDEBD
A0291-4720-1_EN
16
Hardware Reset / Establish SSH Connection
6
Hardware Reset
The network settings in particular can be reset to a defined state by pressing a hardware
key (see figure 2). The reset button must be held down continuously with an appropriate
tool for 5 seconds to do so. Then the settings will be reset - an LED on the front of the
housing will blink to confirm that the process was successful.
7
Establish SSH Connection
Using a standard SSH client, a secure connection can be established to the D4-IGW-4 - for
example, using Kitty or Putty under Windows. The host name or even the IP address given
can be used as the target (standard SSH port => 22)
Login terminal console
User: kbr
Password: kbradmin
