KBR F96 TFT- -5 Series, Руководство пользователя, Страница: 12 / 68

V5.00
26416_EDEBD
A0296-2621-1_EN
12
Range of functions
The device then reports with the following dialog window, in which the first parameteri-
zations can be made: Further settings can then be made on the following pages.
The user name (User) and the password for System Settings are factory-set to:

Username: admin

Password: admin

„Flow Control: Half-Duplex“ controls the switching of the RS485 module.

The web port must be set to 8000.

UART Protokol ist für eBus-TCP auf „NONE“ einzustellen

Gap Time should be set to 10 (ms)
(Waiting time after serial reception until telex is sent over the network).

Cli Waiting Time should be set to a maximum of 15 (seconds).
System Settings
Change the device system settings
User name
Authentication
Password
admin

Host Name
Basic Settings
Network Mode
mmess_et_BA1D42
Router
WIFISettings
Host Name
Basic Settings
WAN IP 192.168.0.1
Subnet mask
255.255.255.0
Gateway 0.0.0.0
DNS 0.0.0.0
OFF
LAN IP
LAN Settings
Mask
Mask
DHCP Server OFF
LAN IP
The LAN IP field is required.
The Mask field is required.
Enable
Telnet Settings
Telnet Port 23
Echo OFF
ON
Enable
Web Settings
Web Port 80
ON
Enable
NTP Settings
OFF