KBO Tornado Step-Thru, Руководство пользователя

Страница: 10 / 24

Assembly Instructions
7
◆
Install the front wheel
Remove the plastic axle guards from the front wheel being sure not to touch the brake rotor set. Open the quick skewer and remove the
thumb nut and cone spring. Carefully lower the fork and ensure the brake rotor goes into the caliper.
Next align the dropouts with the axle of the wheel hub to make sure the fork dropouts are fully seated on the axle. Install the quick
skewer starting from the brake rotor side of the wheel and then push the quick release skewer through the hub. Keep two cone springs
pointed towards the wheel hub. Tighten the thumb nut until the quick release lever is held in line with the axle.
Use a 15mm wrench to tighten the bolts on both sides of the axle, and install the two thumb nuts by pressing them tightly.
Step 1:
Step 2:
Step 3: