KBO RANGER, Руководство пользователя

Страница: 9 / 22

Assembly Instructions
Step 5
: Install the pedals. The left and right pedals are marked on both ends. First, install the right pedal by tightening the pedal in a clockwise
direction. The left pedal is tightened by turning the pedal in a counterclockwise direction. Both pedals should be tightened to 35
Newton meters by using a torque wrench.
Step 6
: Adjust the saddle height. loosen the seat clamp, remove the seat post and ensure the seat clamp is centered over the hole in the seat
tube. Insert the seat post into the slot, adjust the saddle height to a suitable height and tighten the adjustment nut.
Step 7
: Adjust the seat position forwards or backwards. Use an allen wrench to loosen the seat adjustment bolt and make sure to stay within
the marked adjustment range.
Step 8
: Install the taillight. Attach the taillight and the rear rack by the screw.
Step 9
: Check if the battery pack is locked into the frame of the KBO Ranger. When you want to take off the battery, insert the key and turn it to
release the battery pack. The battery pack can be removed and charged separately.
NOTICE: Ensure all hardware is tightened properly and all safety checks in the following sections are performed before �irst use.
Please refer to the assembly video on the Youtube channel KBO Bike and detailing a closer look if you have any questions
regarding the assembly of your bike. If you are not able to ensure all the assembly steps in the assembly video are performed
properly, or you are unable to view the assembly video please consult a certi�ied local bicycle service provider for assistance in
addition to contacting KBO Bike for help.
7