KBO Hurricane, Руководство пользователя

Страница: 8 / 22

Assembly Instructions
Step 1
: Install the handlebars. Use the assembly tool to remove the four screws from the stem. Set the handlebars in the stem ensuring the
linear markings on the handlebars are centered and the handlebars are adjusted to a comfortable position. Finally, tighten the screws
with the assembly tool.
Step 2
: Install the pedals. The left and right pedals are marked on both ends. First, install the left pedal by tightening the pedal in a counter
clockwise direction. The right pedal is tightened by turning the pedal in a clockwise direction. Both pedals should be tightened to 35
Newton meters by using a torque wrench.
Step 3
: Install the front wheel. Remove the plastic guards from the fork and axle being sure not to touch the brake rotor set. Align the dropouts
with the axle of the wheel hub, then lower the wheel ensuring the brake rotor goes into the caliper. Install the quick-release skewer
starting from the brake rotor side of the wheel. Put on the cone spring and tighten the thumb nut, and then use the palm of your hand to
close the quick-release skewer.
Step 4
: Adjust the saddle height to a comfortable position. Loosen up the quick release on the seat, �ind a height that works for you, and tighten
the quick-release.
Step 5
: Adjust the seat position forwards or backwards. Use an allen wrench to loosen the seat adjustment bolt, choose a proper position, and
tighten it.
NOTICE: The following assembly steps are only a general guide to assist in the assembly of your KBO Bike and not a complete or
comprehensive manual of all aspects of assembly, maintenance and repair. We recommend you consult a certi�ied bicycle
mechanic to assist in the assembly, repair and maintenance of your bicycle. For detailed instructions please view the KBO
Hurricane assembly video found at www.kbobike.com.
6