08/2017
Cable tie applied too close -> bad contact
•
Lay the individual wires and the cable
harness as shown in the figure.
•
Use sufficient cable ties and position
them as shown in the figure.
•
Ensure good contact.
Attention
In order to operate this tanning device according to
its intended use, each of the following defects must
be remedied / corrected.
•
Route the wires min. 1.2 inches
vertically out of the connector plug.
Attention
Never attach cable ties directly next to
the connector plug.
4.4
Check positions from inside
Perfect condition
min. 1,2 in
Incorrect conditions