KBL megaSun space 3000, Руководство пользователя

Страница: 40 / 52

B r u k s a n v i s n i n g | megaSun space 3000
40
Interior unit lighting
LED - UNIT LIGHTING
If the tanning device is lighted by means of high-
performance-LED‘s, these can only be replaced by a
qualified specialist if they are defective. In this case,
contact the service department!
CONVENTIONAL UNIT LIGHTING
4
If the tanning device is lighted by means of fluores-
cent lights, proceed as follows:
DOOR
Loosen the door facing at one corner and slowly pull
it forward with the aid of a suction cup.
Loosen the two screws of the door panel and lift the
panel carefully out of the side guides.
Caution
Place the door panel carefully on a pad-
ded surface.
There are 2 decorative tubes beneath the door panel.
Turn the tube a quarter turn to the right and take it
out towards the front. Replace the tube, the colour
filter (if present) and the starter. Fasten door panel
and door facing again.
LATERAL PARTS
Dismantle the acrylic pane in the respective lateral
part as described in section “Cleaning and replacing
the acrylic panes”.
Remove the two front tubes in the left and right lat-
eral part (they are marked in the illustration below).
Underneath you will find the lighting equipment.
Replace the lighting tube and, if present, the colour
filter, with new parts.