background image

AROMA 

  06/07

TIMER AROMA

> press ENTER

Entering switching times for the Aroma Timer.
The submenu is invoked by
pressing START (ENTER).

㊾ 

SELECT WEEK OR DAY OF THE WEEK

ENTER SWITCHING TIME

SET SWITCHING CYCLES

AROMA\TIMER AROMA  

02/02

 

 

          > 

Monday: OFF

> (Day) ON

> (Day) OFF

Select input 

fields

(start / set)

AROMA\TIMER AROMA  

01/08

> PRESS ENTER

 

 

          > 

> Monday - Sunday

AROMA\TIMER AROMA  

02/02

Monday: OFF

 

 

          > 

> 00:00 - 23:59

> XX : XX 

• Save settings by 

pressing STORE! 

+/-

 Set the time

                           SUBMENU

                          TIMER AROMA

Starts the Aroma test (1 cycle).

AROMA 

  07/07

Aroma start testcycle

> Start: press `+` for 2s

Not available in this system.

AIR CONDITIONING   

01/02

Aircon (air conditioning)

Specifies the “start speed” setting of the body fan 
at the beginning of the tanning.

Factory setting

: 2

 

 

          >

> 1 .. . 9

AIR CONDITIONING   

02/02

Start level body fan

Not available in this system.

Note:
For tanning devices with LED technology, the 
desired RGB color mode is adjusted by the color-
Motion controller.

 

 

          >

RGB 

  01/01

RGB mode

EASYCARE   01/03

SETTINGS

> press ENTER

Not available in this system.

O p e r a t i n g   I n s t r u c t i o n s

 

|

 megaSun space 3000 & hurricane & Thunder Hybrid

32

Содержание megaSun space 3000





















































Отзывы:

Похожие инструкции для megaSun space 3000