The easyCare menu item is only available with CPI
Energy and smart technology tanning devices that
are connected to an easyCare system.
EASYCARE 01/03
SETTINGS
> press ENTER
Submenu SETTINGS.
Invoked by pressing
START (ENTER).
SUBMENU
EASYCARE SETTINGS
easyCare mode only (EConly)
man. time config (T.Display)
easyCare tanning time
Adjust
Set value quicktest
Melanin min value
Melanin min runtime
If this function is active, the tanning session is strictly
carried out on the basis of the values determined by
the easyCare system. The adjustment „on-US“ is
required for operation in the United States.
Factory setting
: Depending on the operator country
>
> on-US
> on
> off
EASYCARE\SETTINGS 01/07
easyCare mode only (eonly)
If this function is active, the tanning time can be
entered at the easyCare unit. The tanning power will
be adapted automatically.
Factory setting
: off
>
> on
> off
EASYCARE\SETTINGS 02/07
man. time config (TDispl.)
Allows for preselecting the tanning time. The tanning
power will be adapted automatically.
Factory setting
: 20 min
>
> 8min .. . 20min
EASYCARE\SETTINGS 03/07
easyCare tanning time
>
> 1 .. . 7
EASYCARE\SETTINGS 04/07
Adjust
These settings must only be made by
trained service personnel!
The default setting „1“ must not be
changed.
Factory setting
: 244
These settings must only be made by
trained service personnel!
EASYCARE\SETTINGS 05/07
Set value quicktest
>
> 150.. .300
Factory setting
: EU=0 / USA=100
These settings must only be made by
trained service personnel!
EASYCARE\SETTINGS 06/07
Melanin min value
>
> 0.. .400
I n s t r u k c j a e k s p l o a t a c j i
|
megaSun 7900
α
35
Содержание megaSun 7900 Adeluxe
Страница 1: ...INSTRUKCJA EKSPLOATACJI ...