A s s e m b l y I n s t r u c t i o n s
|
7000
α
/8000
α
touch
23
4.8.2 REMOVE FRONT PLASTIC CLADDING
• Disconnect the two plug connectors D1/D2 in the
control panel tray.
• Loosen three M6x16 countersunk screws each on
both
sides left/right.
6
• Lower the canopy (second person) and loosen the
two rear knurled nuts. Only on 7900/8000
α
tanning
devices.
• Open the canopy and evenly press the front edge
of the cladding on both sides a little bit upwards.
• Then gently pull the rear edge of the cladding from
the slot.
In 7900/8000
α
devices,
also lift the
cladding from the bolts of the knurled
nuts.
• Lift the cladding out towards the front.
• Transport it to the installation site and set it down
safely on protective padding.
Содержание MegaSun 7000a
