kbice FDFM1JA01, Инструкция по эксплуатации

Страница: 5 / 30

5
2 4 4 1 2 M a i n S t . S u i t e 1 0 5 , C a r s o n , C A 9 0 7 4 5
7-How to flush the unit with clean potable water once a week to
prevent high water TDS and hardness
 Empty the ice bin and water reservoir following instructions in Section 2.
 Fill the water reservoir with clean potable water to MAX WATER FILL.
 Plug the unit into power. You will hear 5 beeps if the reservoir is full.
 Press and hold the Clean button for 3 seconds to start the cleaning cycle
for flushing process. The Clean LED will start flashing slowly (it takes 30
minutes to complete and the Clean LED goes off).
 Drain water following instructions in Section 1.
8-How to descale the unit with citric acid once a month to prevent
sediment buildup
 Empty the ice bin and water reservoir following instructions in Section 2.
 Fill the water reservoir with 12 teaspoons of food grade citric acid
powder.
 Fill the water reservoir with clean potable water to MAX WATER FILL.
 Mix them well.
 Plug the unit into power. You will hear 5 beeps if the reservoir is full.
 Press and hold the Clean button for 3 seconds to start the cleaning cycle
for descaling process. The Clean LED will start flashing slowly (it takes
30 minutes to complete and the Clean LED goes off).
 Drain water following instructions in Section 1.
 Fill the water reservoir with clean potable water to MAX WATER FILL.
 Plug the unit into power. You will hear 5 beeps if the reservoir is full.
 Press and hold the Clean button for 3 seconds to start the cleaning cycle
for rinse process. Press and hold the Clean button again for 3 seconds in
5 minutes to stop rinsing.
 Drain water following instructions in Section 1.
 Repeat the rinse process 2~3 times.
9-How to sanitize the unit with chlorine bleach once a month to
prevent bacteria growth