KBC FTL1-S1A-BS, Руководство пользователя

Страница: 3 / 8

Manual-FTL1-S1A-BS FTL1-S1B-BS 10 100M
（
3U+3U
）
-Rev1104
Page 3 of 8 www.kbcnetworks.com
Copyright © KBC Networks Ltd.
1. Overview
1.1 Introduction
The FTL1-S1A-BS/FTL1-S1B-BS Series 10/100M Auto-Sensing Ethernet single-mode
Fiber Optic Transceiver is designed using advanced fiber optic technology. This series
transmit and receive 10/100 Mbps (no adjustment is required) data over a single-mode
optical fiber, extending the Ethernet transmission distance from its normal few hundred
meters to 25 kilometers. By using optical fiber as transmission media, this series continue
to perform its secured, high-speed and long-distance communication even under the
adverse condition such as lighting, power surge and electromagnetic interference;
substantial saving on lighting and power surge protection equipments if copper wires were
used.
The FTL1-S1A-BS/FTL1-S1B-BS Series is fully assembled using SMT components for
stability and reliability.
1.2 Technical Specification
ETHERNET
Supporting standards IEEE802.3 10Base-T, 100Base-T
Data Rate 10/100Mbps auto-sensing, Full Duplex or Half
Duplex
Physical Interface RJ45, Auto MDI/MDIX
OPTICAL
Number of Fibers 1
Wavelength 1550nm (Transmitter); 1310nm (Receiver)
Fiber Type 9/125µm(SM)
Distance 0 ~ 25Km
Connector Type ST/PC