KBC FTDR-S2-WSB, Руководство пользователя

Страница: 10 / 12

Manual-FTDR-Rev1311.pdf Page 10 of 12 www.kbcnetworks.com
Copyright © KBC Networks Ltd.
2.3 Caution
•
Switch off all power supply before installation
•
Ensure fiber is properly aligned to the receiving connector
•
Do NOT stare at the fiber core
•
When selecting the Point-to-Point (Trunk Line) / Point-to-Multipoint (Star topology),
all the FTDR-S2-WSB Fiber Optic Modem should be set in the primary mode.
•
When selecting the Multi-Drop Self-healing Ring Mode, only one FTDR-S2-WSB
Fiber Optic Modem should be set in the primary mode, the others are set in the
secondary mode.
2.4 Install Application
Notice:
In figure1, all the FTDR-S2-WSB Fiber Optic Modem should be set in the primary mode.
Dip1=OFF
Dip1=OFF
Dip1=OFF
Dip1=OFF