KBC ESML4-FL1-S2 Скачать руководство пользователя страница 12

Страница: 12 / 17

Ethernet Switch User Manual

Manual-ESUL4-FL1_Series

HW-Rev0611B

Page 12 of 17

www.kbcnetworks.com

Troubleshooting

3.1

Self-testing

When the device is powered on, all LEDs on the front panel will flash once, indicating

that the ports are running normally and the Power (PWR1/2) indicator lights will be

illuminated.

3.2

Twisted Pair Port Testing

As shown in Figure 3.1, with the switch powered on, connect two RJ45 ports from

the switch to two test computers and send the “ping” command between each

computer. If both the computers receive the complete command without packet loss

and the green LED flashes, this means that the two RJ45 ports are working correctly.

Test the other RJ45 ports as required, using the same method. During normal

operation the green ACT LED will flash to show data transfer and the yellow LINK

LED will either be off to show 10Mbps (10BASE-T) operation or on to show 100Mbps

(100BASE-TX) operation.

PC1

PC2

Figure: 3.1 Testing TP ports

Содержание ESML4-FL1-S2


















Результаты поиска

Содержание ESML4-FL1-S2

Отзывы:

Похожие инструкции для ESML4-FL1-S2

Бренды по названию

Популярные бренды

KBC ESML4-FL1-S2, Руководство пользователя

Результаты поиска

Содержание ESML4-FL1-S2

Отзывы:

Похожие инструкции для ESML4-FL1-S2

Бренды по названию

Популярные бренды