Page 8 of 8
3)
Use a network cable to connect the RJ45 port of the transmitter and the
powered device. Plug the network cable into the UTP port of the
transmitter and use a grounding wire to connect the grounding terminal.
4)
Check that the installation is correct and power on the device to be sure
it is operating normally.
Troubleshooting
Please refer to the following information if the device does not work:
⚫
Confirm the installation has been done according to the factory
installation requirements.
⚫
Confirm the RJ45 cable order is in accordance with the EIA/TIA568A or
568B industry standards.
⚫
The maximum transmission distance depends on the signal source and
cable quality. Please do not exceed the maximum transmission distance.
⚫
Try replacing each end with a known working unit to determine if you
have a damaged or faulty unit.
⚫
If the problem persists, please contact your nearest KBC office or dealer.
Need Help?
office or dealer.
