13
Call barring
Barring restrictions can be set on incoming and outgoing calls.
This function needs the support of network operator, please contact the network
operator for further information.
Advanced settings
Blacklist
You can on or off this feature to edit the blacklist number, up to 20 numbers can be
edited. Open the function, the blacklist numbers you call, the other shows you are on
the phone, and your phone is in a state of no response
Auto redial
You can enable or disable this feature. If the feature is turned on then is a call is not
successful then it will be automatically redialed up to 10 times.
Call time reminder
When set, an in call beep will sound after the selected time period. This can be after
a specified number of seconds or you can select a time period after which the beep
will sound.
Answer mode
Any key –When set, any key will answer incoming calls with the exception of the right
soft key and the end key.
Auto answer when headset -When set, incoming calls will automatically be answered
if a headset is inserted.
5.3 DATA SETTINGS
Set network related settings such as network selection and the use of GPRS.
Automatic or manual network selection is available to determine the network that is
camped onto.
5.4 SECURITY SETTINGS
SIM security
You can set and enable the PIN code and PIN” codes
Note that if the input PIN code wrong three times, the SIM card will automatically lock
and unlock and a PUK code will be required to unlock. Please contact your SIM card
provider for more details regarding PUK codes.
PIN lock
Under this you can enable or disable PIN password. When this feature is enabled,
every time you turn the phone prompts you to enter the PIN password.
Change PIN
If the current PIN password is already activated, you can make changes to the PIN
password. First enter the old PIN password twice and then specify the desired, new
14
password for future use.
Change PIN2
PIN2passwordis used to access a particular function (such as setting a fixed number,
set the call billing, etc.)
If PIN2 is entered incorrectly 3 times a PUK2 code will be required to unlock.
Phone security
A phone passcode can be set to avoid unauthorised use of your mobile phone.
Phone lock
Under this you can enable or disable phone password. To do so, the phone password
must be entered.
The default code is 0000
.
When this feature is enabled, every time you turn the phone on you are prompted to
enter the password.
Change password
You can make changes to the phone password. First enter the old phone password,
and then enter the newly selected password twice to confirm.
5.5 CONNECTIVITY
Data account
Preloaded MMS accounts are displayed.
These accounts can be manually edited, deleted and added.
5.6 RESTORE FACTORY SETTINGS
Reset the phone settings to default using this feature. The phone password is
required to use this feature.
Default password is 0000.
The phone provides you with four profiles: general, silent, meeting, outdoor. The
profiles tailor the phone settings according to different environments by using a
range of different tones and alerts. These profiles can be personalised according to
your requirements.
6. PROFILES
