USER SERVICING INSTRUCTIONS
• Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
• If your fan loses power and you suspect that the fuse on your fan has
blown, you should first remove the spare fuse holder attached to the cord
plug (Fig. 1). Remove the spare fuse from the plastic spare fuse holder,
and set the spare fuse aside (Fig. 2).
• You can gain access to the blown fuse by sliding open the door found on
the side of the plug. Slide the door outward until the blown fuse is fully
visible (Fig. 3).
•
Carefully remove the blown fuse and snap the replacement fuse into
place. Risk of fire. Replace fuse only with 2.5 Amp, 125 volt fuse
(provided with product). Fully close the fuse door by sliding back into
place. Discard the blown fuse. The plug should now be ready for normal
use
.
•
Risk of fire. Do not replace attachment plug. Contains a safety device
(fuse) that should not be removed. Discard product if the attachment plug
is damaged.
• If you need further information on how or when to replace the fuse in
the safety plug, please contact Kaz Consumer Relations Department by
visiting our website at www.kaz.com or calling 1-800-477-0457.
This fan features a patented fused safety plug which is designed to cut off electric current to the
fan if an electrical fault occurs. Please see below for more information on how to properly use
your fan and replace the safety plug fuse, if needed.
FUSED SAFETY PLUG – FOR US MODELS ONLY
Fig. 1
Fig. 2
Fig. 3
13.
Place the fan on a dry level surface.
14.
Do not hang or mount fan on a wall or
ceiling.
15.
Do not operate if the fan housing is
removed or damaged.
16.
A loose fit between the AC outlet
(receptacle) and plug may cause
overheating and a distortion of the plug.
Contact a qualified electrician to replace
loose or worn outlet.
17.
Do not operate any fan with a damaged
cord or plug. Discard any damaged fan,
return the fan to the retailer where the
fan was purchased, or request a return
authorization to return to Kaz, Inc. for
examination and/or repair.
18.
Do not run fan cord under carpeting. Do
not cover cord with throw rugs, runners,
or similar coverings. Do not route cord
under furniture or appliances. Arrange
cord away from traffic areas and where it
will not be tripped over.
WARNING: To Reduce The Risk of Fire or
Electric Shock, Do Not Use This Fan With
Any Solid-State Speed Control Device.
