Buttons and Functions
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the
How to Use Basic Functions
section of this manual.
04
ON/OFF
Turns the unit on or off.
MODE
OK
TIMER
CLEAN
LED
Turbo
Scrolls through operation modes
as follows:
AUTO
COOL
DRY
HEAT
FAN
SWING
Increases temperate in
1°C increments.
Max. temperature is
30°C.
TEMP
Used to confirm the selected
functions
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
Set timer to turn unit on or off
NOTE:
HEAT mode is not supported
by the cooling only appliance.
Used to start/stop the Self
Clean function.
Turns indoor unit’s LED display
and air conditioner buzzer on and
off (model dependent), which
create a comfortable and quiet
environment.
FAN SPEED
TEMP
Enables unit to reach preset
temperature in shortest possible
time.
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
NOTE: Holding this button
down for 2 seconds will
activate Silence feature.
Decreases temperature
in 1 C increments.
Min. temperature is 17 C.
O
O
SLEEP
Saves energy during sleeping
hours.
Model:
KID- 05.1 S
, KID-05 S
FRESH
Used to start/stop the Fresh
feature.
Scrolls through operation
functions as follows:
Follow Me( ) AP mode
( )
Follow Me( )...
The selected symbol will
flash on the display area,
press OK button to confirm.
SET
Fresh
