Kaysun KCT-03 SR, Инструкция по установке и эксплуатации

Страница: 19 / 32

16
Field Setting
1. Restore Factory Default
• At any time, press and hold (Mode), (Function), ▲ and ▼ buttons at the same time for 5 seconds, and the wired
controller will reset.
Figure 7.1
2. Query and Set the Indoor Unit Address
• If the indoor unit has no address, the display will show " FE ", and the wired controller will display an E9 error.
• Press and hold ▲ and ▼ buttons for 8 seconds to go to the page to set the indoor unit address. press (Cancel)
button to exit the settings page.
Figure 7.2
• Query and set up the address of the indoor unit is allowed in the address setting page.
• In the address setting page, the wired controller displays the current address if the indoor unit has an address. If
the indoor unit has no address, press ▲ and ▼ buttons to adjust
Note:
• The main wired controller can set the "
Timer ", " Filter " and " Indoor unit commissioning parameter " , but not the
secondary remoter controller.
• The " Follow Me " function of the main wired controller is effective but the secondary wired controller does not have
this function.
• If either controller is used to change the operating state of the indoor unit, the change will be synchronized to the
parameters in the other controller.