background image

5

● F5 underside air intake(Version II)

Vertical unit with casing. Underside air intake and top air outlet. 

It can be installed on the floor,or hung on the wall.

● F3B concealed(Version III)

Vertical unit without casing. Underside air intake and top air 

outlet. It is suitable for concealed installation requirement.

Air Outlet Louver

Feet

Table 3-1

Air Filter

Underside Air Intake

Air outlet  

Electric Control Box

Air Intake  

Air Filter  

Air Intake  

Inhalation Grating

Air Outlet Louver  

Electric Control Box

Air Filter  

Fig.2-12

Fig.2-13

Fig.2-14

■   Two-way cassette type

3.   AIR CONDITIONER OPERATIONS 

AND PERFORMANCE

The operating temperature range under which the unit runs stably 

are given in Table 3-1.

Temperature

Mode

Indoor temperature

Cooling mode

17°C ~ 32°C

If the indoor humidity is above 80%, 

condensation may form on the surface of 

the unit.

Heating mode (If it 

exists)

≤27°C

NOTE

The unit performs stably in the temperature range given 

in Table 3-1. If the indoor temperature is outside the unit's 

normal operating range, it may stop running and display an 

error code.

Heating mode is only available when the unit is connected 

to a system that can provide heating.

To ensure the desired temperature is achieved efficiently, 

ensure that:

- All windows and door are closed.

- The airflow direction is adjusted to work in running mode.

- The air filter is clean.

■   Please note how you can best save energy 

and achieve the best cooling/heating effect.

● 

Regularly clean air filters inside indoor units.

check 

regularly

Содержание KCOF-22 DN4.0





















Отзывы: