Kaysun KCC-64 WEB, Руководство пользователя, Страница: 20 / 56

17
Note: When one LAN accesses multiple KCC-64 WEB gateways, IP addresses of these
gateways are displayed, as shown in
②
. In this case, one-to-one correspondence between
the KCC-64 WEB gateways and the IP addresses cannot be achieved. It is recommended
that every time when the user completes configuring a KCC-64 WEB device, the user
should timely rename the KCC-64 WEB device and record its IP address.
The following figure shows how to configure multiple KCC-64 WEB gateways:
①
Click "KCC-64 WEB Management".
②
Click "+" at the upper right corner. The KCC-
64 WEB configuration interface is displayed.
③
Select a configuration manner. The
subsequent steps are the same as those for configuring the KCC-64 WEB via a network
cable. Repeat the preceding steps to add multiple KCC-64 WEB devices until all the KCC-
64 WEB devices are configured.