manualshive.com logo in svg

Kaysun KAYF-22 DN4.0, Руководство пользователя, Страница: 16 / 20

Поделиться
Скачать
Kaysun KAYF-22 DN4.0 Скачать руководство пользователя страница 16

14

7.3  Remote controller troubleshooting

WARNING

Certain troubleshooting steps that a professional technician may perform when investigating an error are described in 

this owner's manual for reference only. Do not attempt to undertake these steps yourself – arrange for a professional 

technician to investigate the problem.

If any of the following errors occur, power the unit off and contact a professional technician immediately. Do not attempt 

troubleshooting yourself:

- A safety device such as a fuse or circuit breaker frequently blows/trips.

- An object or water enters the unit.

- Water is leaking from the unit.

Table 7-2

Symptom

Possible causes

Troubleshooting steps

The fan speed cannot 

be adjusted

- Check whether the MODE 

indicated on the display is "AUTO".

- In automatic mode, the air conditioner 

will automatically change the fan’s 

speed.

- Check whether the MODE 

indicated on the display is "DRY".

- When dry mode is selected, the air 

conditioner automatically adjusts the fan 

speed. (The fan speed can be selected 

during "COOL", "FAN ONLY", and 

"HEAT".)

The remote controller signal is 

not transmitted even when the 

ON/OFF button is pushed

- A power cut has occurred (the 

power to the premises has been 

cut-off).

- The remote controller's batteries 

are dead.

- Wait for the power to come back on.

- Replace the batteries.

The indication on the display 

disappears after a certain time

- Check whether the timer operation 

has come to an end when TIMER 

OFF is indicated on the display.

- The air conditioner operation will stop 

up to the set time. 

The TIMER ON indicator goes 

off after a certain time

- Check whether the timer operation 

has come to an end when TIMER 

ON is indicated on the display.

- Up to the set time, the air conditioner 

will automatically start and the 

appropriate indicator will go off.  

No receiving sound from the 

indoor unit when the ON/OFF 

button is pressed

- Check whether the signal 

transmitter of the remote controller 

is properly directed to the infrared 

signal receiver of the indoor 

unit when the ON/OFF button is 

pressed.

- Directly transmit the signal transmitter 

of the remote controller to the infrared 

signal receiver of the indoor unit, and 

then press the ON/OFF button twice.

Содержание KAYF-22 DN4.0





















Отзывы:

Нет отзывов