Aufbau Olaf engl.fh11 11.03.2008 10:46 Uhr Seite 1
Probedruck
C
M
Y
CM
MY
CY CMY
K
Please lay the architrave 4 and the back part 2 on the ground in order
to push in the transverse nuts 7 . Now screw in the threaded bars 5 .
Set up one side frame 1 and then install the architrave 4 by putting it with
the threaded bars through the lower drilled holes of the side frame. The wooden
pegs must fit properly into the drillings. Bolt the architrave with two brass
caps 8 .
Now, the construction stands steady already!
Set up the second side frame 1 so that the architrave 4 can be hung in.
Secure this connection with loosely screwed brass caps.
Now the back part 2 has to be put between the side frames. Fit it into the
first frame and then push the second side frame onto the threaded bars
(drawing below).
(For the Olaf 135 only: Screw the lower back part with brass caps securely to
the side frame. Now the upper back part has to be put on the lower one and
must be screwed securely to the same side frame. After this, screw the second
side frame with brass caps.)
Secure all threaded bars with brass caps. In order to avoid tilting, firstly screw
all brass caps on one side and then those on the other side.
Assembly Instructions
for your new - care cot
These are our mechanics
Robert and Stefan.
They will help you
to assemble your KayserBed!
Nice to meet you!
Hello!
