Kayoba 024654, Руководство по эксплуатации

Страница: 11 / 20

EN
11
USE
Follow the instructions below to set your own combination.
1. Turn the thumbwheel (2) to the default combination 0-0-0.
2. Press the reset button (1) with a suitable implement until it
clicks.
3. Set the required combination with the thumbwheel (2).
4. Press the button (3) in the direction of the arrow until it
clicks again.
5. Repeat the above steps if the combination needs to be
changed again. Memorise the combination – without the
correct combination the lock cannot be opened, and must
be broken open.
NOTE:
The zip runners can only be put in the lock to lock the case
when the thumbwheel has the set combination.
WARNING!
If the lock has been opened with the lock cylinder it must be
locked by turning the cylinder in the direction of the arrow to
the red point.
FIG. 2
Any tool that fits in the cylinder can be used for this.