EN
24
DESCRIPTION
Assembly parts
No.
Designation
Qty
1
Upper vertical bar
1
2
Base frame
1
3
Top frame
1
4
Lower back bar
1
5
Back bar
1
6
Seat support
1
7
Seat frame
1
8
Frame to adjust seat
1
9
Seat
1
10
Upright
1
11
Frame with press bar
1
12
Left press frame
1
13
Right press frame
1
14
Foam roller
4
15
Foam roller
1
16
Foam roller
1
17
Frame
1
18
Frame to adjust backrest
1
19
Backrest
1
20
Frame for pulley
1
21
Frame for arm
1
22
Wire guide
2
23
Right hand support
1
24
Left hand support
1
25
Plate
2
26
Lat bar
1
27
Straight bar
1
28
Fastener
SAFETY INSTRUCTIONS
• Follow the assembly instructions carefully.
• Check all screws, nuts and other
connections before using the machine for
the first time, and check that it is in safe
condition.
• Place the machine on a level surface,
away from water and moisture.
• Use a protective covering (e.g. rubber mat,
wooden board) when assembling the
machine.
• Remove all objects within a radius of
2 metres from the machine before
starting to exercise.
• Do not use strong detergents to clean the
machine. Use the supplied tools, or your
own suitable tools to assemble or repair
the machine. Wipe off moisture and
sweat after each session.
• Incorrect or excessive exercise can be
harmful. Consult your doctor before
starting a training programme. You can
be advised about suitable levels for pulse,
exertion, duration etc. The appliance is
not suitable for physiotherapy.
• Check that the machine is in good
condition before using it. Only use original
spare parts.
• Wear suitable training clothing and shoes.
• Stop training immediately and consult a
doctor if you are affected by dizziness,
nausea, or other symptoms.
• Children and handicapped persons must
only use the machine under the supervision
of a person who can provide assistance and
advice.
• The maximum permitted user weight is
100 kg.
NOTE:
After some time, check that the wires are
correctly tensioned and that they run in the
pulleys.
