ZHEJIANG KAYO MOTOR CO., LTD.
WWW.RIDEKAYO.COM
Check the oil seal before using.
Grease the oil seal lip before assembly.
18.
When installing rubber hose parts, insert the rubber pipe into the fitting. If there is
a hose clamp, install the hose clamp in the hose indentation. Replace rubber hoses if
dried, cracked, or deformed
19.
Clean all gasket material from surfaces of before installing new parts or
reassembling.
20.
Do not bend cables excessively. Kinked or damaged cables may cause poor
response and inner cables to fray and eventually break.
21.
When assembling any protective caps, covers or boots make sure they are seated
correctly in the respective grooves.
Engine Break-in
Proper Engine break in is necessary on new engines and newly rebuilt engines
to help ensure that longevity and reliability of the engine components.
Recommended break-in time is 20 hours, as follows:
0~10 hours: Operate at no more than ½ throttle, keep gear changes and speed
variances to a minimum. Do not operate for extended amounts of time with a fixed
throttle position. Let the engine cool for 5 to 10 minutes after each hour of operation.
Avoid quick acceleration.
0~20 hours: Operate at no more than 3/4 throttle, do not operate for extended amounts
of time with a fixed throttle position. Change gears and vary speeds as necessary. Let
the engine cool for 5 to 10 minutes after each hour of operation. Avoid quick
acceleration.
Note:
During break-in period, inspect for noises and wear and follow maintenance
schedule.
After Break-in period is complete schedule the unit for an inspection and service
1.2 VIN Number
