KAYO MOTOR A180, Руководство по обслуживанию

Страница: 47 / 213

3
Front brake pump combination
<Fluid volume> Check the brake fluid
volume
Check the brake fluid quantity through the
observation hole 3. When the brake fluid
quantity decreases to near the lower limit of
hole 3, the vehicle will not be used
continuously at this time, so it is necessary
to check the leakage of the brake pump,
brake pipe and various connections. If the
inspection is normal, it is necessary to check
the wear of the brake disc and brake pad. If
it is damaged or worn below the service
limit, replace it.
It is also necessary to check these items
before using the vehicle every time.
Remove two exhaust screws 1
Remove the oil cup cover 2
Replenish the brake fluid recommended by
Kayo until the upper limit.
Note

Do not mix dust and water when
replenishing brake fluid.

To prevent chemical changes, please use
the designated brand of brake fluid.

Because the brake fluid will damage the
plastic surface and rubber surface, please
do not splash it on these parts.
Turn the steering handle slightly to the left
1
2
3