Kaynemaile
®
Installation Guide :
Hanging Screens
Fig 1.1
1.
2.
3.
Set Out and Install the Hooks
Prepare the Screen
1.
Before setting out the hooks ensure there is
adequate structure at the fixing locations to
support the screen.
2.
Set out the the top and bottom hook
positions and ensure they are aligned. The
outer hooks should be 50-80mm in from
the ends of each tube. Space the remaining
hooks across the screen width evenly at a
maximum of 600mm
3.
Screw the top hooks part way in to allow for
final adjustment of the screen once in place.
4.
Screw the bottom hooks part way in to
allow for final adjustment of the screen
once in place.
1.
Lay the screen out on the floor with the
labels on the top side. Position the screen
so you can identify all corners.
1.
The hanging top and bottom tubes may be
supplied as one piece or multiple pieces
depending on the screen size. To join
multiple pieces you must remove the cap
screws at the join location. This allows the
tube joiner inserts to slide inside the tubes.
2.
Once the tube sections have been joined
together reinsert the cap screws and
tighten.
Fig 2.1
Fig 2.2
Fig 2.3
Prepare Tubes
=
RH
TOP
BOTTOM
LH
TUBE
TUBE
TUBE JOINER
CAP SCREWS
RING RETAINER
RING RETAINER
^ J^
^ J^
TUBE JOINER
CAP SCREWS
TUBE CLEARANCE
