3
Uniform light source
Solid cap
2.3
System connection
Please take a minute to read carefully the system connection instructions listed below.
1.
Firmly insert the Komodo board to PCIe connector of the motherboard.
2.
Align the QSFP+/SFP+ transceiver in front of the module’s transceiver socket opening and
carefully slide the QSFP+/ SFP+ transceiver into the socket until the transceiver makes contact
with the socket electrical connector.
3.
Insert the fiber cable into the module, by firmly pushing each cable into the module, until you
will hear a click.
4.
Connect the Power Adaptor to the JetCam power supply connector.
5.
Turn the camera and the computer on and start your Vision Point software application.
An example of JetCam system connection is described in the image below:
Komodo Fiber
Frame Grabber
JetCam Camera
Fiber cable
(up to 80 km)
Power
supply
Figure 2 : JetCam Camera system connection diagram
For more detailed information please refer to JetCam User Guide documentation.
Introduction
