Laws and building and safety codes governing the design and use of glazed entrance, window
, and curtain wall products vary widely
. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor
.
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
© Kawneer Company
, Inc., 2013
3
kawneer.com
EC 97904-076
#10-24 PFHMS
Kawneer 1786 Rim Exit Device
INSTALLATION INSTRUCTIONS
APRIL, 2018
038311EN
Trim mounting
base
Lever handle
(Shown as LH)
Steel flat washer
& lock washer
15/16" cylinder
with 0.800" cam
Mounting guide plate
Cylinder retaining ring
1/4"-20 x 1/2" PPHS
Fastener slot cut-out
1/4"-20 x 3/4" PPHS
Non. Wall Thickness
1/8" or 3/16"
Threadlocker
1/4"-20 x 3/4" PPHS
Lock Arm Switch
15/16"
1/8" Cylinder Projection
0.800" Cam Sweep
Note:
See Step #7
Break-away
tail piece
190/350/500 Standard Door (1-3/4") [with 2-1/4" fastener]
350/500 Heavy Wall Door (2") [with 2-1/2" fastener]
AA250/AA425 Thermal Door (2-1/4") [with 2-3/4" fastener]
1-7/8"
2-1/8"
2-3/8"
