kawneer.com
Laws and building and safety codes gover
ning the design and use of glazed
entrance, window
, and curtain wall pr
oducts vary widely
. Kawneer does not contr
ol
the selection of pr
oduct configurations, operating har
dwar
e, or glazing materials,
and assumes no r
esponsibility ther
efor
.
Kawneer r
eserves the right to change configuration without prior notice when deemed
necessary for pr
oduct impr
ovement.
© Kawneer Company
, Inc., 2013
4
038310
EC 95424-057
#10-24 PFHMS
KAWNEER 1686 CONCEALED EXIT DEVICE
INSTALLATION INSTRUCTIONS
FEBRUARY, 2015
TO DOG EXIT DEVICE
Insert the hex key and turn clockwise until it stops.
Fully depress touch bar and release the key.
With touch bar retracted remove hex key.
TO UNDOG EXIT DEVICE
Push on touch bar. Insert hex key and turn clockwise
until it stops. Release touch bar, when the touch
bar is in the extended position release hex key and remove.
EXIT DEVICE WITH PUSH PAD DOGGING:
Non. Wall Thickness
1/8" or 3/16"
Threadlocker
1/4"-20 x 3/4" PPHS
Lock Arm Switch
15/16"
1/8" Cylinder Projection
Fastener slot cut-out
1/4"-20 x 3/4" PPHS
0.800" Cam Sweep
Note:
See Step #6
