Installation
Disassembly Packaging
▲
1.Remove the tape outside the carton, and lift up the carton.
2
.
Remove
the
wooden
board,take out the foam.
3
.
Spare
parts bag
:
user
manual
,
plug
wire
,
etc
.
lift
up the carton
▲
Back
Cushion
pillar take
out
the
foam
remove
the
wooden
board
8
1. Zip the cushion up on the chair.
2. Link the air pipes on the cushion and
the air pipes on the chair. Make sure they
are well plugged in case of air leak.
Installation
2
.
Link
the
air
pipe
on
the
armrest and the air pipe on the chair. Make sure they are well plugged
in case of air leak.
3
.
Insert
the
armrest into the slot on chair then install the washer and screws to fix it.Then install
another armrest in the same way.
4
.
Tidy
up
the
chair
after
armrests are well installed.
▲
Armrest
1.Remove two screws.
▲
Legrest
9
1.Take out the legrest and use screws to install it
to the chair.
2.Link the wires and air pipes on
the legrest and chair. Make sure
they are well plugged.
screw
hole
screw
holes
slot
screw
holes
on the armrest
