![background image](http://html1.mh-extra.com/html/kawai/mp7se/mp7se_owners-manual_3984448067.webp)
67
ST
O
RE B
ut
to
n & S
ET
UP
s
The MP7SE’s SETUP memories allow the entire instrument configuration, including selected sounds, section volume
levels, parameter settings, and EQ adjustments, etc. to be stored and recalled immediately at the touch of a button.
SETUPs are arranged in an 8x8x4 configuration, allowing for a total of 256 individual memories.
This page explains how to select SETUP mode and recall and edit a SETUP memory.
Selecting SETUP mode
Press the SETUP button to select SETUP mode.
The LED indicator for the SETUP button will turn on to indicate
that SETUP mode is selected.
The LED indicators for the currently selected SETUP memory
buttons will also turn on, and the name of the SETUP memory
will be shown in the LCD display.
Selected
SETUP
* The previously selected SETUP memory will be recalled automatically.
* To check which sounds are assigned to each zone, press and hold the
desired F1~F4 function button.
Selecting SETUPs
While SETUP mode is turned ON:
Press the SETUP memory buttons to select the desired SETUP
memory.
Selected
SETUP
* In order to prevent abrupt ‘breaks’ in sound, the selected SETUP will not
be applied immediately (i.e. when the button is pushed), but with the next
key press. This allows subsequent SETUPs to be selected while the notes
of the existing SETUP are held/sustained, resulting in a smooth transition
between songs/sequences etc.
Editing SETUPs
While SETUP mode is turned ON:
Press the EDIT buttons to edit the selected SETUP memory.
The LED indicator for the SETUP button will start to flash, to
indicate that the SETUP memory is being edited.
In addition, the LED indicators for the SOUND and sound
selection buttons will also turn on, to indicate which sound is
assigned to the currently selected zone.
LED indicator ON:
SETUP mode is turned ON
LED indicator ON:
Selected SETUP buttons
SETUP Memories
Example:
To select SETUP memory 2-3D, press ‘E.PIANO’ category
button, the ‘3’ sub-category button, and the ‘D’ variation button.
LED indicator flashing:
SETUP is being edited