![background image](http://html1.mh-extra.com/html/kawai/mp7se/mp7se_owners-manual_3984448107.webp)
107
SY
ST
EM
M
enu
SYSTEM Menu Parameters & Functions
3. Knob Action
normal
,
catcH
This parameter determines the adjustment behaviour of the
four control knobs (A, B, C, D).
Mode
Description
Normal Value changes immediately when control knob is turned.
Catch
Value does not change until control knob ‘catches’ the
previously stored value, thus preventing unexpected
jumps in parameter values.
* The default setting is Normal.
4. Volume Fader Action
normal
,
catcH
This parameter determines the adjustment behaviour of the
section volume faders.
Mode
Description
Normal Volume changes immediately when fader is moved.
Catch
Volume does not change until fader ‘catches’ the
previously stored volume value, thus preventing
unexpected volume jumps.
* The default setting is Normal.
5. LCD Contrast
value
: 1 ~ 10
This parameter adjusts the contrast of the LCD display.
The contrast becomes sharper as the value increases.
* The default setting is 5.
6. LCD Reverse
o
n
, o
ff
This parameter inverts the black and white pixels of the LCD
display, which may improve visibility in certain situations.
* The default setting is OFF.
7. Input Level
value
: –18 db ~ +18 db
This parameter adjusts the gain of the MP7SE’s LINE IN jacks.
If the output level of the external device is too high, reduce the value
of this parameter. Alternatively, if the output is too low, increase the
value of this parameter.
* The default setting is 0 dB.
8. Audio Out Mode
s
tereo
, 2
x
m
ono
This parameter allows the MP7SE’s LINE OUT signal to be
changed from stereo to dual-mono.
This may be useful in certain situations, allowing one output to be
used for a monitor speaker and the other to be plugged into the
mixing console.
Mode
Description
Stereo
The Line-out signal is normal stereo.
2xMono The Line-out signal is mono on both jacks.
* The default setting is Stereo.
* Stereo EFX such as AutoPan will be turned OFF when 2xMono is selected.
9. Lock SW Mode
6
types
This function determines which controls will be locked when
the LOCK ( ) button is pressed.
Mode
Description
Panel
The main control panel will be locked.
Bend
The pitch bend wheel will be locked.
Mod.
The modulation wheel will be locked.
Center
The centre pedal will be locked.
Left
The left pedal will be locked.
EXP
The expression pedal (EXP) will be locked.
* The default setting is Panel Lock.
10. Auto Power Off
o
ff
, 15
mins
., 60
mins
., 120
mins
.
This parameter determines the period of inactivity that should
pass before the MP7SE automatically turns OFF.
Value
Description
Off
The Auto Power Off function is disabled.
15 mins.
The MP7SE will turn off after 15 minutes of inactivity.
60 mins.
The MP7SE will turn off after 60 minutes of inactivity.
120 mins.
The MP7SE will turn off after 120 minutes of inactivity.
* The default setting for this parameter depends on the market region.
11/12. SW1/SW2 Mode
3
functions
This parameter determines the global operation for the
assignable SW1/SW2 buttons.
SW modes
Mode
Description
Normal
The button will use the assigned EDIT menu function.
Setup+
The button will select the next SETUP memory.
Setup-
The button will select the previous SETUP memory.