61
ST
O
RE B
ut
to
n & S
ET
UP
s
Overview of the STORE Button
2
Storing a SETUP
This function will store all the EDIT menu parameters for the PIANO, E.PIANO, SUB, and MIDI OUT sections, panel
button and knob states, and EQ settings to one of the MP11SE’s 208 SETUP memories.
1. Entering the STORE screen
Press the STORE button.
The LED indicator for the STORE button will turn ON, and the
store selection screen will be shown in the LCD display.
2. Selecting the Store Setup function
Press the F2 button (SETUP) to select the Store Setup function,
then press the F4 button (EXEC).
The Store Setup screen will be shown in the LCD display.
SETUP
selected
3. Naming the SETUP, selecting the bank/memory
Turn control knobs A and B to move the cursor position and
select the characters for the SETUP name.
Press the BANK
buttons and SETUP memory buttons (1~8)
to select the bank and memory for the new SETUP.
SETUP
memory
SETUP
name
Press the F4 function button (EXEC).
The Store Setup confirmation screen will be shown in the LCD
display.
4. Confirming the Store Setup operation
Press the F2 button (YES) to confirm the Store Setup operation,
or the F3 button (NO) to return to the previous screen.
* The existing SETUP memory will be overwritten with the new SETUP.
* The +/YES and –/NO buttons can also be used to confirm or cancel the
store operation.
* When the SETUP has been stored and the SETUP button has been turned
OFF, the panel settings will return to the POWERON state.
LED indicator ON:
STORE mode is selected
Move cursor
position
Select
character
× 2
Example:
To select SETUP memory C-2, press the BANK
button twice, then press the memory button.
F3 button:
NO: Cancel
F2 button:
YES: Confirm