46
ED
IT
M
en
u
EDIT Menu parameters
(PIANO, E.PIANO, SUB)
3. Key Volume
5
types
+ 5
user
This parameter selects the Key Volume setting for the selected
sound section, if desired.
Key Volume
Description
Normal (default)
An evenly balanced volume throughout the
keyboard.
High Damping
Gradually reduces the volume of the keyboard
towards the treble region.
Low Damping
Gradually reduces the volume of the keyboard
towards the bass region.
High & Low
Damping
Gradually reduces the volume of the keyboard
in both the treble and bass regions.
Center Damping
Gradually reduces the volume of the keyboard
in the central region.
User
A custom keyboard volume, allowing the
volume of each key to be individually adjusted.
* For information about creating User Key Volumes, please refer to the User
Edit explanation in the SYSTEM menu chapter (page 108).
4. Minimum Touch
value
: 1 ~ 20
This parameter adjusts the minimum key velocity required to
produce a sound.
5. Octave Shift
value
: –3 ~ +3
octaves
This parameter adjusts the amount of octave transposition for
the selected sound.
* This parameter is not stored to SOUND but to SETUP only.
6. Zone Transpose
value
: –12 ~ +12
This parameter adjusts the amount of transposition for the
selected sound.
* This parameter is not stored to SOUND but to SETUP only.
7. Key Scaling Damping
o
n
, o
ff
This parameter determines whether or not damping (velocity
reduction) should be applied to a sound over a specific range.
This parameter may be useful when layering a piano sound with a strings
sound, in order to reduce the level of the strings in the higher key range.
8. Key Scaling Key
range
: a0 ~ c8
This parameter defines the point on the keyboard from which
Key Scaling Damping should be applied, up to the highest key.
9. Key Range Type
o
ff
, u
pper
, l
ower
, z
one
This parameter selects the Key Range type for the selected
section.
Type
Description
Off
The sound is used for all 88 keys of the keyboard.
Upper
The sound is used for the upper split.
Lower
The sound is used for the lower split.
Zone
The sound is used for a defined zone between two keys.
* This parameter is not stored to SOUND but to SETUP only.
10. Split Point
range
: a0 ~ c8
This parameter defines the point on the keyboard at which the
upper and lower parts are divided.
* For more information about Key Range functions, please refer to page
26.
* This parameter is common for all three sound sections and all MIDI zones.
* This parameter is not stored to SOUND but to SETUP only.
11. Key Range Zone Lo
range
: a0 ~ c8
This parameter defines the bottom key of the key range zone.
* For more information about Key Range functions, please refer to page 26.
* This parameter is not stored to SOUND but to SETUP only.
12. Key Range Zone Hi
range
: a0 ~ c8
This parameter defines the top key of the key range zone.
* For more information about Key Range functions, please refer to page 26.
* This parameter is not stored to SOUND but to SETUP only.
5
Key Setup
(cont.)