103
Settings
Virtual Technician
3
. Damper Resonance
Pressing the damper pedal of an acoustic piano raises all dampers, allowing the strings to vibrate freely. When a
note or chord is played on the piano with the sustain pedal pressed, not only will the strings of the notes played
vibrate, but also the strings of other notes, vibrating in sympathetic resonance.
This instrument recreates this phenomenon, with the Damper Resonance setting allowing the volume of this
resonance sound to be adjusted.
* This Virtual Technician setting will affect acoustic piano sounds only.
Adjusting the Damper Resonance volume
Long press and drag the slider to adjust the volume of the
Damper Resonance setting.
* The Damper Resonance volume can be adjusted within the range
of Off, 1~10, with higher values resulting in a more pronounced
resonance.
* Any changes made to the Damper Resonance setting will remain until
the power is turned off.
* Preferred Damper Resonance settings can be stored to the sound’s
memory (in Sound mode) or a Favorite memory for convenient recall.
For more information, please refer to “1. Storing and Selecting Favorite
memories” on page 79 and “Storing the Virtual Technician settings”
on page 98.
4
. Damper Noise
When the damper pedal of an acoustic piano is pressed and released, it is often possible to hear the sound of the
damper head touching and releasing the strings.
This instrument reproduces this sound, with the Damper Noise setting allowing the volume of this sound to be
adjusted. The speed at which the damper pedal is pressed will also influence the prominence of the damper noise,
with fast pedalling creating a very pronounced sound.
* This Virtual Technician setting will affect acoustic piano sounds only.
Adjusting the Damper Noise volume
Long press and drag the slider to adjust the volume of the
Damper Noise setting.
* The Damper Noise volume can be adjusted within the range of Off,
1~10, with higher values resulting in a more pronounced noise.
* Any changes made to the Damper Noise setting will remain until the
power is turned off.
* Preferred Damper Noise settings can be stored to the sound’s memory
(in Sound mode) or a Favorite memory for convenient recall. For
more information, please refer to “1. Storing and Selecting Favorite
memories” on page 79 and “Storing the Virtual Technician settings”
on page 98.
Sound Mode
Damper Resonance slider
Pianist Mode
Sound Mode
Damper Noise slider
Содержание K-500 Aures
Страница 10: ...10 Introduction Part Names and Functions k m n p o a b c d e f g h i j l...
Страница 166: ......
Страница 167: ......