Page
32
5
FUNCTION MODE
11) TRANSMIT MIDI PROGRAM CHANGE
This function determines whether or not the CN23 digital piano will transmit program change information when
sound types are changes. It is also possible to transmit a program change number (ranging from 1 to 128) in order
to change the sound type of an external MIDI sound source.
Step 1
Press and hold the METRONOME and SOUND SELECT buttons simultaneously, then press the key
assigned to the PROGRAM function.
Step 2
While still holding down the METRONOME and SOUND SELECT buttons, press the ‘-(off)’ key to disable
transmitting program change data when selecting sounds, or the ‘+ (on)’ key to enable transmitting program
change data when selecting sounds.
The TRANSMIT PROGRAM CHANGE setting is set to ‘off’ when the CN23 digital piano is turned on.
Step 3
To transmit the desired program change number directly, fi rst press and hold the METRONOME and SOUND
SELECT buttons simultaneously, press the key assigned to the PROGRAM function, then enter the three
digit number using the number keys.
Three digit program change numbers ranging from 001 to 128 can be transmitted. For example, press ‘0’, ‘0’, and ‘1’ to
transmit program change number 1.
The program change number will be transmitted automatically when the key for the third digit number is pressed.
number keys
Transmit On
Transmit Off
Use these keys to specify the program change number to be transmitted.
1 2 3 4 5 6 7 8 9 0
- +
off on
CN23̲EN.indd 32
2009/11/26 13:09:11
