![background image](http://html1.mh-extra.com/html/kawai/ca501/ca501_owners-manual_3718549088.webp)
88
Appendix
A
ssembly I
nstruc
tions
3. Mounting A onto the stand
①
Lift A and carefully place it onto the stand. Position A so that
the metal fitting holes are visible on the front side of A when
viewed from above.
②
Secure C in place. To prevent A from tilting and falling off,
hold the front side of A with one hand and slide A forwards.
The hook of A engages the metal fitting of the side panel.
Be careful not to have hands or fingers caught between
A and the stand.
①
②
A
C
B
B
4. Fastening A to the stand
①
Temporarily fasten A and the stand with four screws
a
(with
flat washer and spring washer).
②
First, loosely fasten the screws
a
, and move A to the position
that allows the four screws go straight in. Then, even out the
left and right overhang.
③
Lastly, tighten the temporary fastened screws
a
until the
spring washer becomes flat to ensure that A is rigidly at-
tached to the stand.
Make sure to fasten A to the stand using the screws.
Failure to do so could cause A to fall off from the stand,
which is extremely dangerous.
C
A
B
②
a
Front view
Содержание CA501
