
ASSEMBLY STEPS
BILL OF MATERIAL
HARDWARE LIST
Step 1- Place top ply 1(120x60) cm
hole side up on a flat protected surface
Step 4- Assemble Ply 2 to frame
alignment holeson frame as shown
(use-self threading screw- 04 Nos)
Step 5- Assemble Ply 3 to frame
alignment holes on frame as shown
(use-M6X32 bolt- 02 Nos)
Step 6- Assemble 2 frames (Frame 2)
at position byaligning holes on ply as
shown (use-M6X72 bolt- 02 Nos)
Step 2- Assemble 2 frames (frame1) at
position by aligning holes on ply as
shown (use-M6X32 bolt-02 Nos)
Step 3- Assemble square tube both the
side on surfaceof ply
(use-M6X38 bolt-04 Nos)
For Next Step Turn The Page
FH-11
FH-09