KaVo SMARTmatic S20, Инструкция по эксплуатации

Страница: 15 / 28

Instructions for use SMARTmatic S20 - 1.011.6750 SMARTmatic S20 K - 1.011.6751 SMARTmatic S20 S - 1.011.6752
5 Operation | 5.4 Removing the bur
WARNING
Hazard from rotating bur.
Lacerations.
▶ Do not touch the bur while it is rotating!
▶ Remove the bur from the medical device after treatment to avoid injury and infec-
tion when putting it away.
CAUTION
Use of burs with worn or damaged shafts.
Risk of injury, tool may fall out during treatment.
▶ Never use burs with damaged or worn shafts.
CAUTION
Hazard from defective chucking system.
The tool can fall out and cause injury.
▶ Pull on the tool to check if the chucking system is functioning properly and that
the tool is firmly clamped. Wear gloves or a finger guard when you check, insert
or remove the bits to prevent injury and infection.
NOTICE
Tool shaft slips inside the chuck due to excessive speed of the tool or abrupt engage-
ment of the tool.
Property damage to tool shaft and chuck system, reduction of the service life of tool
and chuck system.
▶ Do not operate the tool at a higher speed than recommended by the manufac-
turer.
NOTICE
Use of burs with worn or damaged shafts.
Property damage to the chuck system, tool is difficult or impossible to remove from
the chuck system.
▶ Do not use burs with damaged or worn shafts.
▶ Insert the bur into the segment of the head drive by twisting the tool slightly, and
push it to the bur stop.
▶ Check that the bur is securely attached by pulling on it.
5.4 Removing the bur
WARNING
Hazard from rotating bur.
Lacerations and damage to the chuck system.
▶ Do not touch the bur while it is rotating!
▶ Never press the push-button while the bur is rotating!
▶ Remove the bur from the contra-angle handpiece after treatment to avoid injury
and infection when putting it away.
▶ After the bur has stopped rotating, firmly press the push-button with your thumb
and simultaneously pull out the bur.
15 / 28