KaVo Scan eXam One Скачать руководство пользователя страница 38

Страница: 38 / 73

5 Introduction to imaging plate technique

KaVo Scan eXam One

5.2 Hygiene accessories

The imaging plate is protected with a protective cov-

er and a hygiene bag before the exposure. Protec-

tive cover and hygiene bag are protecting the plate

from:

•

Ambient light

•

Contamination

•

Mechanical wearing

•

Moisture

NOTICE!

USE ONLY GENUINE, ORIGINAL HYGIENE

ACCESSORIES AND IMAGING PLATES DESIGNED

FOR THIS SYSTEM AND SUPPLIED BY AUTHORIZED

DISTRIBUTOR. The manufacturer of this system

will not be held responsible for any problems

caused by using accessories from other

manufacturers. PROPER USE OF ORIGINAL

HYGIENE ACCESSORIES ENSURES THE BEST

IMAGE QUALITY AND MAXIMUM SERVICE LIFE OF

THE IMAGING PLATES.

The packed imaging plate is positioned with a

holder in the patient’s mouth. The exposure is

made as with film. The hygiene bag should be

disinfected after exposure and disposed off after

single use.

1. Imaging plate is inserted together with the pro-

tective cover all the way into the plate slot.

2. Magnet on the plate carrier grabs the imaging

plate.

3. Processing starts automatically after you re-

move the protective cover.

Dispose protective cover after single use.

Approved:

Reviewed: Jalkanen Joni 2017-02-13 16:00

Reviewed

See PDM system to determine the status of this document. Printed out: 2017-03-17 10:35:17

D510414, 5

Содержание Scan eXam One










































































Результаты поиска

Содержание Scan eXam One

Отзывы:

Похожие инструкции для Scan eXam One

Бренды по названию

Популярные бренды

KaVo Scan eXam One, Руководство пользователя

Результаты поиска

Содержание Scan eXam One

Отзывы:

Похожие инструкции для Scan eXam One

Бренды по названию

Популярные бренды