KaVo ProXam iS, Инструкция по эксплуатации, Страница: 14 / 30

7 Capturing intraoral images
When connecting the sensor for the first time the message
Loading
calibration files appears on the Romexis window. Also, if you connect the
same sensor to another workstation the files will be loaded again.
7.1 Capturing single intraoral images
Steps
1. Click the intraoral exposure button on the main page of the 2D module or
on the top toolbar to initiate the intraoral image capture mode
The
Intraoral Exposure window appears.
When the X-ray unit is getting ready for exposure, the message Waiting
for Ready appears on top of the window.
2. Prepare the patient for exposure, select exposure parameters and
position the intraoral X-ray unit as required, for more information refer
to the unit's user’s manual/Instructions for use.
NOTE
Inform the patient that the sensor may feel warm in the mouth.
When the intraoral sensor system is ready for exposure the message
Waiting for Exposure appears on top of the window.
3. Take an exposure as usual.
After the exposure the message Saving the image appears on the
display and the image is automatically stored into the database.
4. Define the tooth numbers and sensor orientation.
The sensor orientation is indicated in the image by a grey triangle.
7 Capturing intraoral images
10 KaVo ProXam iS Instructions for use