KaVo MULTIflex Coupling 465 RN, Инструкция по эксплуатации

Страница: 15 / 28

Instructions for use MULTIflex Coupling 465 RN – 0.553.1600, MULTIflex LUX Coupling 465 LRN – 0.553.1550
5 Operation | 5.1 Connecting the coupling to the hose
15 / 28
5 Operation
NOTE
At the beginning of each workday, the water-conducting systems should be
rinsed for at least 2 minutes (without transmission handpieces being at-
tached) and if there is a risk of contamination from reflux or back suction, the
system may also need to be rinsed for 20 to 30 seconds after each patient.
5.1 Connecting the coupling to the hose
CAUTION
Malfunction from grasping the regulating ring.
Product defects.
4
Do not grasp the regulating ring.
4
Plug the MULTIflex coupling onto the turbine hose and secure it tightly with
the union nut screw of the hose.
4
Re-tighten with the enclosed wrench.
4
Spray the O-rings on the supply hose with a small amount of KaVo Spray.
The coupling remains screwed onto the hose.
5.2 Removing the coupling from the hose
NOTE
The coupling remains screwed to the hose, use the wrench to remove it.
5.3 Attaching instruments
WARNING
Detachment of the medical device during treatment.
A medical device that is not properly locked can detach from the coupling dur-
ing treatment.
4 Before each use, check if the medical device is securely locked onto the
coupling.
CAUTION
Inexact coupling.
Reduces the service life of the lamp.
4 Avoid inexact coupling.
4
Check the secure fit of the (LUX) handpieces on the coupling by pulling on
them.