KaVo KEY Laser 3+ 1343 Скачать руководство пользователя

Страница: 42 / 80

Note
If the pulse energy is changed when the laser is in ready mode, the KEY Laser 3+ /

III upgraded automatically switches to standby mode.

4.7.2

Select pulse frequency

Available: 2, 3, 4, 6, 10, 13, 15, 20, 25 and 30 Hz.

Note
If the pulse energy is changed when the laser is in ready mode, the KEY Laser 3+ /

III upgraded automatically switches to standby mode.

The selected setting is shown on the touchscreen (such as: 10 Hz).
The pulse frequency can be controlled with the arrow keys and

Alternately, the pulse frequency can also be set using the foot control by pressing

the button.

4.7.3

Display of average performance

Display of the set average performance in W

4.8

User test with handpiece 2060

Note
Make sure that the laser hose is inserted and screwed tight in the coupling, and

that handpiece 2060 is connected.

When the laser is in ready mode, the red pilot laser indicates the contact point of

the therapy laser beam. This pilot laser can be used to determine if the status of the

transmission system is okay.

Содержание KEY Laser 3+ 1343

















































































Результаты поиска

Содержание KEY Laser 3+ 1343

Отзывы:

Похожие инструкции для KEY Laser 3+ 1343

Бренды по названию

Популярные бренды

KaVo KEY Laser 3+ 1343, Инструкция по эксплуатации

Результаты поиска

Содержание KEY Laser 3+ 1343

Отзывы:

Похожие инструкции для KEY Laser 3+ 1343

Бренды по названию

Популярные бренды