KaVo KaVoLUX 540 LED U, Инструкции техника

Страница: 42 / 56

Technician's instructions KaVoLUX 540 LED U / T
11 Safety checks - Test instructions | 11.1 Mounting the device
42 / 56
11 Safety checks - Test instructions
11.1 Mounting the device
Note
The test instructions for the KaVoLUX 540 LED U / T to be mounted to devices are
described in the instructions for use of the respective treatment unit
The measurement of the protective earth, defined in the instructions for use for the
relevant treatment unit, must be extended to include the measuring points "Scan
the light head of the treatment light KaVoLUX 540 LED with the probe".
See also:
2
11.2.2.2.4.2 Scan the light head of the treatment light KaVoLUX 540 LED with the
probe, Page 51
11.2 Ceiling mounting
Note
This chapter describes the safety checks performed on the KaVoLUX 540 LED T for
the case of ceiling mounting.
11.2.1 Introduction
General instructions
Note
The safety checks may only be carried out by one or more electricians (as defined
in IEC 61140) who have received appropriate training for the device to be inspec-
ted.
Note
The contents and specified tests in this document are based on the international
standard, IEC 62353 (DIN VDE 0751-1). This standard applies to the testing and in-
spections of medical electrical equipment or medical electrical systems complying
with IEC 60601-1 (DIN EN 60601-1).
Note
In order to evaluate the safety of medical devices, systems or components of med-
ical devices or systems, the safety checks must be carried out at the times specified
below:
▶ Prior to startup
▶ during maintenance
▶ during inspections and servicing
▶ following repair
▶ on the occasion of recurrent tests
Note
With regard to devices that have not been manufactured in accordance with IEC
60601-1 (DIN EN 60601-1), these requirements can be applied taking the mandat-
ory safety standards for the production of these devices into consideration.