KaVo K-ERGOgrip 4944, Инструкция по эксплуатации, Страница: 16 / 30

Instructions for use K-ERGOgrip 4944
5 Operation | 5.2 Using/Changing the tool
16 / 30
▶ Screw the tip ① to the handpiece ② and tighten with the clip in the direction indi‐
cated by the arrow.
5.2 Using/Changing the tool
▶ Turn the grip sleeve ② and knob ③ in opposite directions as indicated by the ar‐
rows until the chuck opens completely (you will hear a double-click).
▶ Take the tool or test probe ① out of the chuck.
▶ Insert a new tool or test probe ① into the chuck as far as it will go.
▶ Take hold of the handpiece by the grip sleeve ② and turn the knob ③ in the di‐
rection indicated by the arrow until the chuck closes completely (you will hear a
double-click).
Note
Once you have inserted the tool (insert the tool as far as it will go, tool shaft length:
minimum 16 mm) you need to check the functionality of the chuck. KaVo recom‐
mends a grip test at 50 N.
Note
Only use tools that work properly. Follow the instructions of the tool manufacturer.
5.3 Operation
Note
Unsuitable lighting in the workplace can give rise to what is known as the strobo‐
scope effect.
This simulates tool standstill at certain speeds.
The problem can be solved by providing suitable lighting.
▶ Prior to every use, check the required speed on the control unit and modify it if
necessary.